Power Measurement and Data Logger with High-Resolution for Industrial DC-Grid Application
DOI:
https://doi.org/10.1515/ecce-2015-0010Keywords:
Smart Grids, Industrial power systems, Power measurementAbstract
Power and energy measurement and monitoring is a key factor for many industries in terms of energy and cost efficiency evaluation. Due to trends of Smart Grid concept application in industrial environment, including decentralized DC-Grid implementation, for precise evaluation – faster and low-cost measurement equipment is needed. Manufacturing industry widely uses industrial robots that have dynamic load characteristics for which faster measurement equipment is needed.References
D. J. Hammerstrom, “AC Versus DC Distribution SystemsDid We Get it Right?” in Power Engineering Society General Meeting, 2007. IEEE, pp. 1–5, 24–28 June, 2007. http://dx.doi.org/10.1109/pes.2007.386130
A. Sannino, G. Postiglione, M. H. J. Bollen, “Feasibility of a DC network for commercial facilities,” IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1499–1507, Sept.–Oct. 2003. http://dx.doi.org/10.1109/TIA.2003.816517
D. Deaconu, A. Chirila, M. Albu, L. Toma, “Studies on a LV DC network,” in 2007 European Conf. on Power Electronics and Applicat., 2–5 Sept. 2007, pp. 1–7. http://dx.doi.org/10.1109/epe.2007.4417634
K. Techakittiroj, V. Wongpaibool, “Co-existance between AC-Distribution and DC-Distribution: In the View of Appliances,” in 2nd Int. Conf. on Comput. and Elect. Eng., 2009, ICCEE ‘09., 28–30 Dec. 2009, vol. 1, pp. 421–425. http://dx.doi.org/10.1109/iccee.2009.85
Tesla Home Battery “Powerwall” system [Online]. Available: https://www.teslamotors.com/powerwall [Accessed: 27.12.2015].
R. W. De Doncker, “Future DC Grid Technology for more Decentralized Power Production and Renewable Power Supplies,” presented at the IEEE PEDG2012 conference, 28 June 2012.
S. Grijalva, M. U. Tariq, “Prosumer-based smart grid architecture enables a flat, sustainable electricity industry,” in 2011 IEEE PES Innovative Smart Grid Technologies, ISGT, pp. 1–6, 17–19 Jan. 2011. http://dx.doi.org/10.1109/isgt.2011.5759167
S. Grijalva, M. Costley, N. Ainsworth, “Prosumer-based control architecture for the future electricity grid,” in 2011 IEEE Int. Conf. on Control Applications, CCA, pp. 43–48, 28–30 Sept. 2011. http://dx.doi.org/10.1109/cca.2011.6044467
F. Khoucha, M. Benbouzid, Y. Amirat, A. Kheloui, “Integrated energy management of a plug-in electric vehicle in residential distribution systems with renewables,” in 2015 IEEE 24th Int. Symp. on Ind. Electron., ISIE, pp. 717–722, 3–5 June 2015. http://dx.doi.org/10.1109/isie.2015.7281557
J. Yang, “Protection issue discussion of DC network development: Circuit breaker or fault-tolerant converter,” in Developments in Power Systems Protection, 2012. DPSP 2012., pp. 1–6, 23–26 April 2012. http://dx.doi.org/10.1049/cp.2012.0085
M. E. Baran, N. R. Mahajan, “Overcurrent Protection on Voltage-Source-Converter-Based Multiterminal DC Distribution Systems,” IEEE Trans. Power Delivery, vol. 22, no. 1, pp. 406–412, Jan. 2007. http://dx.doi.org/10.1109/TPWRD.2006.877086
P. Apse-Apsitis, A. Avotins, L. Ribickis, “A different approach to electrical energy consumption monitoring,” in 2014 16th European Conf. on Power Electron. and Applicat., EPE’14-ECCE Europe, pp. 1–5, 26–28 Aug. 2014. http://dx.doi.org/10.1109/epe.2014.6910970
P. Apse-Apsitis, A. Avotins, L. Ribickis, “Bidirectional DC/AC energy flow measurement,” in 2015 IEEE 5th Int. Conf. on Power Engineering, Energy and Electrical Drives, POWERENG, pp. 465–468, 11–13 May 2015. http://dx.doi.org/10.1109/powereng.2015.7266362
M. Pellicciari, A. Avotins, K. Bengtsson, G. Berselli, N. Bey, B. Lennartson, D. Meike, “AREUS — Innovative hardware and software for sustainable industrial robotics,” in 2015 IEEE Int. Conference on Automation Science and Engineering, CASE, pp. 1325–1332, 24–28 Aug. 2015. http://dx.doi.org/10.1109/coase.2015.7294282
A. Senfelds, M. Vorobjovs, D. Meike, O. Bormanis, “Power smoothing approach within industrial DC microgrid with supercapacitor storage for robotic manufacturing application,” in 2015 IEEE Int. Conf. on Automation Science and Engineering, CASE, pp. 1333–1338, 24–28 Aug. 2015. http://dx.doi.org/10.1109/coase.2015.7294283
Atmel AVR1631: Single Phase Energy Meter using XMEGA A, Available: http://www.atmel.com/images/doc42039.pdf
P. Apse-Apsitis, A. Avotins, L. Ribickis, “System and Method for Monitoring Real Power Consumption,” in International patent application WO 2013/093554 A1, published 27.06.2013
S. T. English, “A Low Cost Watt-Hour Energy Meter Based on the ADE7757,” Available: http://www.analog.com/static/imported-files/application_notes/AN-679.pdf
P. Apse-Apsitis, A. Avotins, L. Ribickis, J. Zakis, “Development of Energy Monitoring System for Smart Grid Application,” in 3rd IFIP WG 5.5/SOSOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2012, Costa de Caparica, Portugal, 2012 Proceedings, Springer Berlin Heidelberg, New York, ISSN 1868-4238, ISBN 978-3-642-28254-6, pp. 347–354. http://dx.doi.org/10.1007/978-3-642-28255-3_38 b
P. Apse-Apsitis, A. Avotins, L. Ribickis, “Concept of Low-Cost Energy Monitoring System for household Application,” in Proc. ELMAR-2011, Zadar, Croatia, pp. 149–152, ISBN: 978-953-7044-12-1.
Harmonic Current Emissions, Guidelines to the standard EN 61000-3-2, Available: http://www.epsma.org/pdf/PFC20Guide_November202010.pdf
E. Bassi, F. Benzi, L. Lusetti, G. S. Buja, “Communication protocols for electrical drives,” in Proc. of the 1995 IEEE IECON 21st Int. Conf. on Ind. Electron., Control, and Instrumentation, 6–10 Nov 1995, vol. 1, pp. 706–711. http://dx.doi.org/10.1109/iecon.1995.483494
Siegfried, C.; Constantin, R.; Stancescu, S., “Evaluation of protocol for industrial informatics systems,” in 2010 8th Int. Conf. on Commun., COMM, 10–12 June 2010, pp. 293–296. http://dx.doi.org/10.1109/iccomm.2010.5509109
PI Whitepaper “The PROFIenergy profile”, March 2010, PROFIBUS Nutzerorganisation e.V.(PNO), Available: http://www.profibus.com/download/brochures-white-paper/
P. Ferrari, A. Flammini, D. Marioli, A. Taroni, “Experimental evaluation of PROFINET performance,” in Proc. 2004 IEEE Int. Workshop on Factory Commun. Systems, 22–24 Sept. 2004, pp. 331–334. http://dx.doi.org/10.1109/wfcs.2004.1377739
H. Bernhard, J. Mottok, “Real-time Behaviour of Ethernet on the Example of PROFINET”.
Hardware Design Guide, Anybus® CompactCom M40, Doc.Id. HMSI-216-126 Rev. 1.40.
A. Suzdalenko, “Current Sensorless Control of Front-end Bidirectional AC/DC Converter Based on Half-bridge Topology,” Electrical, Control and Communication Engineering, vol. 4, pp. 19–25, 2013. http://dx.doi.org/10.2478/ecce-2013-0017
Downloads
Published
Issue
Section
License
Copyright (c) 2015 Peteris Apse-Apsitis, Armands Senfelds, Ansis Avotins, Arturs Paugurs, Marcis Prieditis (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
