Electrical Measuring Techniques — Expectations for Increasing Accuracy
DOI:
https://doi.org/10.2478/v10144-010-0029-8Keywords:
calibrated disturbing factors, dielectric permeability, non-destructive testing, thickness of filmsAbstract
Multi parameter testing by Calibrated Disturbing Factors (CDF) methodology may present interest as more sophisticated mean for increasing metrological qualities of electrical testing techniques. Detailed analysis of a set of validation parameters, such as thickness and dielectric permeability of plates, demonstrates advantage of this approach in comparison with single parameter tests.References
Heerens, Willem Chr., "Application of capacitance techniques in sensor design," Journal of Physics E: Scientific Instruments. Vol. 19, 1986, pp. 897-906.
Baxter, Larry K. Capacitive Sensors: Design and Applications, IEEE Press, 1996, 320 p.3.
Donald F. Adams. Correlations between polymer matrix and composite mechanical properties. Journal of Polymer Science: Polymer Symposia, Volume 72, Issue 1, 1985, pp. 303-317
John. Summerscalles, Dielcometry. In: Nondestructive Testing of Fibre-Reinforced Plastic Composites, ed. by John Summerscalles, Elsevier Applied Science, London and New York, Vol.2.2, 1987, pp. 193-227.
I. Matiss and A. Purvinsh, Determination of Dielectric Permeability of Object with Non-Destructive Testing Method and Compensation Correction Data Processing Algorithm, Proceedings of EPE-PEMC 2004 conference, Riga, 2004.
EN ISO/IEC 17025:2005. General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
I. Matiss and A. Purvinsh, Measurement of Frequency Dependent Dielectric Properties by the Capacitance Technique, Proceedings of IEEE-ISIE-2006 (IEEE International Symposium on Industrial Electronics), Canada, 2006.
Downloads
Published
Issue
Section
License
Copyright (c) 2010 Imants Matiss, Andris Purvinsh (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
