Practical Design Guidelines of qZSI Based Step-Up DC/DC Converter
DOI:
https://doi.org/10.2478/v10144-010-0031-1Keywords:
DC/DC power conversion, impedance convertersAbstract
This paper presents some design guidelines for a new voltage fed step-up DC/DC isolated converter. The most significant advantage of proposed converter is voltage buck-boost operation on single stage. The most promising application for proposed converter is in the field of distributed power generation e.g. fuel cells or photovoltaic.The most sensitive issues - such as power losses caused by high currents in the input side of converter and high transient overvoltages across the inverter bridge caused by stray inductances were discussed and solved. The proposals and recommendations to overcome these issues are given in the paper. The Selection and design guidelines of converter elements are proposed and explained.The prototype of proposed converter was built and experimentally tested. Some results are presented and evaluated.References
Vinnikov, D.; Roasto, I.; Zakis, J.; Strzelecki, R. "New Step-Up DC/DC Converter for Fuel Cell Powered Distributed Generation Systems: Some Design Guidelines", in journal "Electrical Review" ISSN 0033-2097, to be published, 2010.
Yuan Li; Anderson, J.; Peng, F. Z.; Dichen Liu, "Quasi-Z-Source Inverter for Photovoltaic Power Generation Systems," Applied Power Electronics Conference and Exposition, 2009. APEC 2009. Twenty-Fourth Annual IEEE, pp. 918-924, 15-19 Feb. 2009.
Vinnikov, D.; Roasto, I.; Jalakas, T., "New Step-Up DC/DC Converter with High-Frequency Isolation", in Proc. of IEEE 35th Annual Conference of Industrial Electronics Society, Porto, Portugal, pp. 667-672, Nov. 2009.
Schanen, J. L.; Clavel, E.; Roudet, J., "Modeling of low inductive busbar connections," Industry Applications Magazine, IEEE, vol.2, no.5, pp.39-43, Sep/Oct 1996.
Zare, F.; Ledwich, G., "Side-by-side planar busbar for voltage source inverters," IEEE 33rd Annual Power Electronics Specialists Conference, pesc 02. vol.4, pp. 1925-1929, 2002.
IPC-2221A: Generic Standard on Printed Board Design. Northbrook, IL: IPC Associated May. 2003.
ANSI/IPC-D-275: Design Standard for Rigid Printed Boards. Institute for Interconnecting and Packaging Electronic Circuits - Lincolnwood, IL Assemblies, sept. 1991.
Guangyong Zhu; McDonald, B.; Kunrong Wang, "Modeling and Analysis of Coupled Inductors in Power Converters," Applied Power Electronics Conference and Exposition, 2009. APEC 2009. Twenty-Fourth Annual IEEE, vol., no., pp.83-89, 15-19 Feb. 2009.
Pit-Leong Wong; Wu, Q.; Peng Xu; Bo Yang; Lee, F. C., "Investigating coupling inductors in the interleaving QSW VRM," Applied Power Electronics Conference and Exposition, 2000. APEC 2000. Fifteenth Annual IEEE, vol.2, no., pp.973-978 vol.2, 2000.
Fang Zheng Peng, "Z-source inverter", IEEE Transactions on Industry Applications, vol.39, no.2, pp. 504-510, Mar/Apr 2003.
Yuan Li; Anderson, J.; Peng, F. Z.; Dichen Liu, "Quasi-Z-Source Inverter for Photovoltaic Power Generation Systems", in Proc. of IEEE Applied Power Electronics Conference and Exposition APEC 2009, pp. 918-924, 15-19 Feb. 2009.
Shen, M.; Joseph, A.; Yi Huang; Peng, F. Z.; Zhaoming Qian, "Design and Development of a 50kW Z-Source Inverter for Fuel Cell Vehicles", in Proc. of CES/IEEE 5th International Power Electronics and Motion Control Conference, IPEMC 2006., vol.2, pp. 1-5, 14-16 Aug. 2006.
Ранкис И. Я., "Оптимизация параметров тиристорных систем импулсного регулирования тягового электропривада.", Рига: Зинатне, pp. 183, 1985.
Cheng, K. W. E.; Evans, P. D.; "Calculation of winding losses in highfrequency toroidal inductors using single strand conductors," Electric Power Applications, IEE Proceedings, vol.141, no.2, pp.52-62, Mar. 1994.
Cheng, K. W. E.; Evans, P. D.; "Calculation of winding losses in high frequency toroidal inductors using multistrand conductors," Electric Power Applications, IEE Proceedings, vol.142, no.5, pp.313-322, Sep. 1995.
Chan, H. L.; Cheng, K. W. E.; Cheung, T. K.; Cheung, C. K.; "Study on Magnetic Materials Used in Power Transformer and Inductor," Power Electronics Systems and Applications, 2006. ICPESA '06. 2nd International Conference, pp.165-169, 12-14 Nov. 2006.
Vinnikov, D.; Roasto, I.; Jalakas, T., "New Step-Up DC/DC Converter with High-Frequency Isolation", in Proc. of IEEE 35th Annual Conference of Industrial Electronics Society, Porto, Portugal, pp. 667-672, Nov. 2009.
Yuan Li; Anderson, J.; Peng, F. Z.; Dichen Liu, "Quasi-Z-Source Inverter for Photovoltaic Power Generation Systems," Applied Power Electronics Conference and Exposition, 2009. APEC 2009. Twenty-Fourth Annual IEEE, pp. 918-924, 15-19 Feb. 2009.
Vinnikov, D.; Roasto, I.; Jalakas, T., "New Step-Up DC/DC Converter with High-Frequency Isolation", in Proc. of IEEE 35th Annual Conference of Industrial Electronics Society, Porto, Portugal, pp. 667-672, Nov. 2009.
Schanen, J. L.; Clavel, E.; Roudet, J., "Modeling of low inductive busbar connections," Industry Applications Magazine, IEEE, vol.2, no.5, pp.39-43, Sep/Oct 1996.
Zare, F.; Ledwich, G., "Side-by-side planar busbar for voltage source inverters," IEEE 33rd Annual Power Electronics Specialists Conference, pesc 02. vol.4, pp. 1925-1929, 2002.
IPC-2221A: Generic Standard on Printed Board Design. Northbrook, IL: IPC Associated May. 2003.
ANSI/IPC-D-275: Design Standard for Rigid Printed Boards. Institute for Interconnecting and Packaging Electronic Circuits - Lincolnwood, IL Assemblies, sept. 1991.
Guangyong Zhu; McDonald, B.; Kunrong Wang, "Modeling and Analysis of Coupled Inductors in Power Converters," Applied Power Electronics Conference and Exposition, 2009. APEC 2009. Twenty-Fourth Annual IEEE, vol., no., pp.83-89, 15-19 Feb. 2009.
Pit-Leong Wong; Wu, Q.; Peng Xu; Bo Yang; Lee, F. C., "Investigating coupling inductors in the interleaving QSW VRM," Applied Power Electronics Conference and Exposition, 2000. APEC 2000. Fifteenth Annual IEEE, vol.2, no., pp.973-978 vol.2, 2000.
Fang Zheng Peng, "Z-source inverter", IEEE Transactions on Industry Applications, vol.39, no.2, pp. 504-510, Mar/Apr 2003.
Yuan Li; Anderson, J.; Peng, F. Z.; Dichen Liu, "Quasi-Z-Source Inverter for Photovoltaic Power Generation Systems", in Proc. of IEEE Applied Power Electronics Conference and Exposition APEC 2009, pp. 918-924, 15-19 Feb. 2009.
Shen, M.; Joseph, A.; Yi Huang; Peng, F. Z.; Zhaoming Qian, "Design and Development of a 50kW Z-Source Inverter for Fuel Cell Vehicles", in Proc. of CES/IEEE 5th International Power Electronics and Motion Control Conference, IPEMC 2006., vol.2, pp. 1-5, 14-16 Aug. 2006.
Ранкис И. Я., "Оптимизация параметров тиристорных систем импулсного регулирования тягового электропривада.", Рига: Зинатне, pp. 183, 1985.
Cheng, K. W. E.; Evans, P. D.; "Calculation of winding losses in highfrequency toroidal inductors using single strand conductors," Electric Power Applications, IEE Proceedings, vol.141, no.2, pp.52-62, Mar. 1994.
Cheng, K. W. E.; Evans, P. D.; "Calculation of winding losses in high frequency toroidal inductors using multistrand conductors," Electric Power Applications, IEE Proceedings, vol.142, no.5, pp.313-322, Sep. 1995.
Chan, H. L.; Cheng, K. W. E.; Cheung, T. K.; Cheung, C. K.; "Study on Magnetic Materials Used in Power Transformer and Inductor," Power Electronics Systems and Applications, 2006. ICPESA '06. 2nd International Conference, pp.165-169, 12-14 Nov. 2006.
Vinnikov, D.; Roasto, I.; Jalakas, T., "New Step-Up DC/DC Converter with High-Frequency Isolation", in Proc. of IEEE 35th Annual Conference of Industrial Electronics Society, Porto, Portugal, pp. 667-672, Nov. 2009.
Downloads
Published
2010-01-01
Issue
Section
Articles
License
Copyright (c) 2010 Janis Zakis, Dmitri Vinnikov, Indrek Roasto, Tanel Jalakas (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Zakis, J., Vinnikov, D., Roasto, I., & Jalakas, T. (2010). Practical Design Guidelines of qZSI Based Step-Up DC/DC Converter. Electrical, Control and Communication Engineering, 27(1), 108-115. https://doi.org/10.2478/v10144-010-0031-1
